The test device ZIEGLER STH-10 is used for temperature-controlled shear tests with a maximum temperature of 50°C. Up to 10 samples can be tested simultaneously. The built-in hour counters measure the shear time.
Hour counters
The hour counters measure the shear time in the range of 0.01–9999.99 hours. No external power supply is required for the built-in hour counters. The service life of the built-in lithium batteries is at least 8 years.
The ZIEGLER STH-10 shear tester can be customized to meet your requirements
- 3, 5, 7, ... 10 test points
- Test weights 3 or 5 kg
- Software Sheartest-Soft, data acquisition program for checking, editing, documenting, saving and exporting the measurement data
Scope of delivery
- Test device with up to 10 test points
- One holding clamp per test point, width 50 mm
- 2x heat insulation cover
- Connection cable with protective contact plug and angled cold device socket, 5 meters
Technical Data |
|
| Heating: | +20 – +45 °C (max. +50 °C) |
| Heating Time: | At a starting temperature of 20 °C → heats to 40 °C in approx. 40 minutes |
| Control deviation: | Max. ± 0.5 K |
| Dimensions: | W 1240 mm x B 600 mm x D 350 mm |
| Total weight: | 40 kg |
| Voltage: | 230 VAC |
| Frequency: | 50/60 Hz |
| Power: | 250 watts |
| Fuse: | 2x 3.15 AT |