FTM 1 | FTM 2 | FTM 3 | FTM 4 | FTM 8 | FTM 9 | FTM 10 | FTM 11 | Afera | PSTC-17 | ASTM D4498 | ASTM D6195

FINAT* FTM 3

To determine release force at low speed in accordance with FINAT* FTM 3, the force required to separate a release liner from a self-adhesive material (or vice versa) is measured. This procedure is performed at a peel speed of 300 mm/min and at a 180-degree angle.

Model:	Function:	Supported standards:
ZIEGLER FT‑1000	Horizontal tensile testing machine for adhesive strength tests Sample table as movable clamp with constant feed Fixed clamp with rigid coupling to the load cell Measurement of separation force and peel strength Optional peel angles of 180° or 90° Control via controls and FTSOFT software More information...	FINAT* FTM 1 FINAT* FTM 2 FINAT* FTM 3 FINAT* FTM 9 FINAT* FTM 10 FINAT* FTM 11 Afera**
ZIEGLER FT-2000	Speed is strictly maintained Adjustable speeds: 50/300/1000 mm/min and peel speeds from 10 mm/min to 10 m/min Standard peel speed is 300 mm/min Optional motorized 90° peel available More information...	FINAT* FTM 1 FINAT* FTM 2 FINAT* FTM 3 FINAT* FTM 9 FINAT* FTM 10 FINAT* FTM 11 Afera**
ZIEGLER FTM 180	For vertical 180° peel tests and Loop Tack measurements Up to 9 individually vertically movable load cells Peel speeds: 300 mm/min and 10 m/min Manually movable sample table More information...	FINAT* FTM 1 FINAT* FTM 3 FINAT* FTM 9 FINAT* FTM 10 FINAT* FTM 11
ZIEGLER FTM-Multi	Sample removal possible at angles of 90° and 180° 6-fold tensile testing device Individually vertically movable load cells Horizontally movable sample table Peel speeds: 10–1000 mm/min More information...	FINAT* FTM 1 FINAT* FTM 2 FINAT* FTM 3

* FINAT, Féderation internationale des fabricants et transformateurs d'adhésifs et thermocollants sur papiers et autres supports.
** Afera, the European Association for the Self Adhesive Tape Industry
*** PSTC, Pressure Sensitive Tape Council
**** ASTM, American Society for Testing and Materials

<< Back to all products