FTM 1 | FTM 2 | FTM 3 | FTM 4 | FTM 8 | FTM 9 | FTM 10 | FTM 11 | Afera | PSTC-17 | ASTM D4498 | ASTM D6195

<<  Back to all products


Afera**

Afera** stands for the "European Adhesive Tape Association." The ZIEGLER Industrie-Elektronik products listed below comply with the test standards issued by Afera**.


Model: Function: Supported standards:
ZIEGLER FT-1000 Klebkraftprüfgerät – Ziegler FT-1000
  • Horizontal tensile testing machine for adhesive strength tests
  • Sample table as a movable clamp with constant feed
  • Fixed clamp with rigid coupling to the load cell
  • Measurement of separation force and peel strength
  • Optional peel angle of 180° or 90°
  • Control via operating elements and FTSOFT software

More information...

  • FINAT* FTM 1
  • FINAT* FTM 2
  • FINAT* FTM 3
  • FINAT* FTM 9
  • FINAT* FTM 10
  • FINAT* FTM 11
  • Afera**
  • ZIEGLER FT-2000 Klebkraftprüfgerät – Ziegler FT-2000
    • Speed ​​is precisely maintained
    • Adjustable speeds: 50/300/1000 mm/min and pull-off speeds from 10 mm/min to 10 m/min
    • Standard pull-off speed is 300 mm/min
    • Optional motor-operated 90° pull-off available

    More information...

  • FINAT* FTM 1
  • FINAT* FTM 2
  • FINAT* FTM 3
  • FINAT* FTM 9
  • FINAT* FTM 10
  • FINAT* FTM 11
  • Afera**
  • ZIEGLER SAFT-24
    Schertester – Ziegler SAFT-24
    • Shear tester designed for vertical shear tests (2° inclination to the vertical) of self-adhesive materials on test plates
    • Testing the ability to withstand high temperatures
    • Shear force test with a constantly increasing temperature is performed in accordance with PTSC-17
    • Samples are tested in a heating chamber for temperature control

    More information...

    • PSTC-17***
      Shear Adhesion of Pressure Sensitive Tape
    • ASTM**** D4498
      Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
    • FINAT* FTM 8
      (without heat)
    • Afera** 5012 Self Adhesive Tapes, Measurement of Static Shear Adhesion (without heat)
    ZIEGLER Loop Tack Test Loop Tack Testing Device – Ziegler
    • Vertical tensile testing machine for measuring initial adhesion ("Loop Tack")
    • Complies with FINAT* and Afera** testing standards
    • Measurement according to FINAT* FTM 9 and ASTM**** D6195
    • Automatic zero point determination of the load cell
    • Software for transferring measurement data to PC for evaluation and processing

    More information...

    • FINAT* FTM 9
    • ASTM**** D6195


    * FINAT, Féderation internationale des fabricants et transformateurs d'adhésifs et thermocollants sur papiers et autres supports.
    ** Afera, the European Association for the Self Adhesive Tape Industry
    *** PSTC, Pressure Sensitive Tape Council
    **** ASTM, American Society for Testing and Materials


    <<  Back to all products

    For questions or for a product consultation:
    Phone-Icon +49 89 313 1760
    Mail-Icon info (at) ziegler-tec (punkt) de